Products filter

(71 products)

Price

$ 2 - $ 61

Material

Color changing effect

Spare parts

Our online smoke shop offers very wide selection of all different bowls, downstems, precoolers and oil domes. All our spare parts are handmade in our craft shop from heat-resistant Pyrex glass. Spare parts are compatible with our water bongs and glass bubblers, but you can surely buy it for any other bong. It is very important to know the type o...

Our online smoke shop offers very wide selection of all different bowls, downstems, precoolers and oil domes. All our spare parts are handmade in our craft shop from heat-resistant Pyrex glass. Spare parts are compatible with our water bongs and glass bubblers, but you can surely buy it for any other bong. It is very important to know the type of the bowl, lenght of the stem and joint size.

Types of our spare parts for glass bongs and bubblers

A bowl is a small container for smoking substances. We make bowls either separated from the stem - glass bowls or fixed with a stem so they come as one piece - bowl slides for glass on glass bongs or rubber grommet bowls for smaller bongs with a carb hole. Stems also differ in their end. Some of them have one opened end and others have few small holes, so called diffuser. A diffuser makes small bubbles, which provide smoother smoking experience. Precoolers can be added to a glass on glass bong. The purpose of a precooler is to cool the smoke and provide better filtration. You can also buy an oil dome for your bong, which is a device for smoking liquid substances.

Use of different replacement parts

For all glass on glass stems and bowls is characteristic a pull out system. After the chamber is full of smoke, you pull out the bowl and inhale the smoke. If you want to operate your water bong only with one hand, you need to buy a rubber grommet bong. Instead of pulling out the bowl you simply take your finger off the carb hole and inhale the smoke from inside the chamber.

More

Spare parts  There are 71 products.

Subcategories

  • Glass bowls 18.8mm

    Glass bowls, 18.8mm are parts of water bongs where you put the smoking substances. All made from durable and health safe Pyrex glass. Most of our glass on glass bowls with 18.8.mm joint size have a little handle for easier manipulation. Glass bowls are quite deep and come in all different shapes, colors and designs. These replacement glass bowls are intended for glass on glass bongs only.

    Boost your bong with a new glass bowl with 18.8mm joint size

    Glass bowls are made in lots of different designs so they can boost your plain bong and give it new look. We have some classic shapes and elegant designs, but also offer some funny bowls like Bart Simpson head or cobra head.

    Replacement glass bong bowls fixed with a stem

    We also offer spare bowls which are fixed with a stem, made as one piece and that is designated for the majority of cheap glass bongs.

  • Bowl slides 16mm

    Bowl slides for bongs with 16mm joint size are spare parts for cheap glass bongs.  All replacement bong slides come as one piece, which means that the bowl is fixed with the stem. Bowl slides 16mm are made only as glass on glass and not with a rubber grommet. The stem can end either with one hole or have few small holes at the end. The stem ended with few small holes is called a diffuser.

    Important parameters of 16mm joint size bowl slides

    Replacement bong slides 16mm are made from the pure Simax glass. Its only up to you, which bowl you get for your water bong unless the length and joint size meets your requirements. You need to know the lenght of the stem /measured from the bottom of the milk white part/ and the joint size.

    Cleaning the bowl slides for bongs

    It is important to clean your glass bong regularly so you can enjoy nice smooth smoking. Our special thin pipe cleaners will help you, or you can use also the cleaning pipe liquids.

  • Bowl slides 14.5mm

    Bowl slides, 14.5mm are spare parts for glass on glass bongs with joint size 14.5mm. All replacement bong slides come as one piece, which means that the bowl is fixed with the stem. The stem can end either with one hole or have few small holes at the end. The stem ended with few small holes is called diffuser. Almost all bowl slides are equipped with a small handle for better manipulation.

    Important parameters of replacement bong slides

    Replacement bong slides 14.5mm are made from the pure Pyrex glass and might be also silver or gold fumed, so you can see the slow color changing effect. Its only up to you, which bowl you get for your water bong unless the length and joint size meets your requirements.

    Cheap glass bowl slides with 14.5mm joint

    The cheapest spare bowl and downstem in this category fits in few different glass on glass bongs made from laboratory glass.

  • Rubber grommet bowls

    Rubber grommet bowls are spare parts mainly intended for rubber grommet bongs with a carb hole. As the title says, the main feature is a rubber grommet, which tightens the bowl with the bong. Rubber grommet bowls are made as one piece, so the bowl is fixed with the stem. All our rubber grommet bowls fit into our water bongs, but can be surely used with any other bongs.

    Rubber grommet replacement bowls for glass bongs

    All our products are made from durable Pyrex glass by our handy glassblowers. We offer really wide selection of all assorted colors, shapes and designs. Before buying one of our rubber grommet bongs it is very important to know the joint size and the stem length. Rubber grommet bowls from our online smoke shop come in two diameters - 9mm or 14.5mm. It is also possible to buy pack of 3 spare rubber grommets.

    Handling a downstem in rubber fitting

    It is good to lubricate the rubber with silicone oil occasionally to preserve flexibility and ensure that the stem will be easily detachable. Be careful when pulling the downstem out of a rubber grommet bong, use a screw motion and pull. Bear in mind that it is glass, quite fragile material.

  • Oil domes

    Oil dome is an accessory for a water bongs that allows using smoking concentrates. Made of borosillicate Pyrex glass in our carft shop. Oil domes fit in the bigger thick glass on glass bongs with a joint size 18.8mm. Its a very good attachable spare part for all those, who changes the smoking dry substances from time to time to the liquids. Another experience for real smokers!

    Description of the Oil domes for bongs

    Oil domes for bongs normally consists of three parts. One is required for reduction glass joint from female to male end. The second is so-called nail, that looks like a small stick with flat round end which has to be placed inside the dome. The third part is a dome that covers the nail flat end. The dome has a female glass joint so it can be easily placed and cover the inside vaporizer stick. Dome has one larger hole, smoking material is inserted through the hole to the hot end of the glass stick inside.

    Glass Oil domes for sale online

    Glass oil domes for sale in our online smoke shop come in two different sizes so you can choose the right one for you. The stem part is ended with few little holes, so called diffuser. Diffuser provides smoother and more pleasurable hits.  Bowl has a small handle for easier use.




  • Precoolers

    Precoolers/ashcatchers are extra chambers intended for glass on glass bongs. They consist of two pieces. The first is a classic one piece glass on glass bowl ended with a diffuser and the second is an extra chamber, which can be added to the bong. The main advantage of having a precooler is that it cools the smoke and provides better filtration, therefore you can enjoy smoother smoking experience.

    Precoolers/aschcatchers for bongs with great features

    Our online smoke shop offers glass precoolers in different shapes and designs. It is possible to get either simple one in pure glass or silver fumed piece, if you want unique color changing glass. All precoolers have a small handle for easier manipulation and some of them have also a diffuser at the end of the stem.

    Why to own glass precoolers?

    As the name indicates precoolers cool the water in extra chamber even more. It also catches the ash so the water in the water bong is cleaner (that is why we call them also ashcatchers), the smoke is cooler and the hit is much smoother. Made of hard borosillicate Pyrex glass.

  • Downstems

    Downstems for glass bongs are the female parts of the sliders. Made from strong, heat-resistant and absolutely health safe Pyrex glass. These replacement downstems fit into the glass on glass bongs with a joint size 18.8mm and are compatible with our glass on glass bowls and bongs. They come in three different lengths and all stems are ended with few small holes called diffuser.

    All about downstems for glass bongs called diffusers

    Diffuser is a glass stem with few small holes at the end. These holes break up your pull into lots of bubbles that cool and filtrate the smoke. The water bong with a diffuser stem is also more quiter.

    Replacement downstems for cheaper laboratory bongs shaped as spiral

    We also offer two spare spirals for the cheap glass bongs made from laboratory glass. These spirals have really unique design. They come as two pieces set together with a small glass on glass bowl.

per page
Showing 1 - 12 of 71 items
Showing 1 - 12 of 71 items