Navigation: Home page - Bowls and precoolers

Bowls with stems with glass on glass or rubber grommet joint, ash catchers (precoolers)

Pages:		1	2	3	4	5	6	>>	Items: 46

Rubber grommet bowl		Rubber grommet bowl		Rubber grommet bowl
In stock	#701 $9.80	In stock	#702 $9.80	In stock	#703 $9.80
Comes with the rubber grommet. Default for bongs: #97, #113, #115		Comes with the rubber grommet. Default for bongs: #97b, #112, #114, #98		Comes with the rubber grommet. Default for bongs #80, #121

Rubber grommet bowl		Rubber grommet bowl		Diffuser stem 18.5mm - 155mm
In stock	#704 $9.80	In stock	#713 $9.80	In stock	#801 $11.20
Comes with the rubber grommet. Default for bong #81		Comes with the rubber grommet.		Diffuser stem 18.5mm - 155mm

Diffuser stem 18.5mm - 210mm		Rubber grommet bowl		Rubber grommet bowl
In stock	#800 $11.20	In stock	#705 $11.90	In stock	#706 $11.90
Diffuser stem 18.5mm		Comes with the rubber grommet. Default for bongs #84, #86, #93		Comes with the rubber grommet. Default for bongs #85, #87

Pages:		1	2	3	4	5	6	>>	Items: 46

Bowls with stems with glass on glass or rubber grommet joint, ash catchers (precoolers)

Slider or stem is the part of bong whitch sits in the base and pokes out of the chamber at a degree higher than the water level. It holds the conepiece/bowl and enables smoke to pass through the water when in use. The stem collects resin over time which can clog the stem, and reduce the air flow through the water. All our conepieces (bowls) have double glass walls for better heat resistance.

Please be noticed that the proportions can be a little different piece to piece cause to handcrafting.

1 piece with rubber

1 piece with glass joint

2 pieces with glass joint